OpenSSL

Issue summary: A malicious remote peer may flood the local QUIC stack with NEW_CONNECTION_ID frames by avoiding a limit check on how many connection IDs the remote QUIC stack can use. Impact summary: The local QUIC stack sends a RETIRE_CONN_ID frame for every NEW_CONNECTION_ID frame it receives. The RETIRE_CONN_ID frame is dispatched via the Control Frame Queue (CFQ). If the remote peer also withholds ACKs, then it can force the local stack to allocate ~400MB (depending on ACK delay). CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: RFC 9000 sections 5.1.1 and 5.1.2 [1] describe the mechanism by which a remote peer can notify the local QUIC stack to change the destination connection ID (a.k.a. CID) the local stack uses to identify the connection at the remote peer. Each CID is associated with a sequence number. The sequence number is transmitted in NEW_CONNECTION_ID and RETIRE_CONNECTION_ID frames to identify the CID which is being either associated with a connection or retired. The remote peer sends a NEW_CONNECTION_ID frame to let the local stack know a new CID is being associated with an existing connection. The NEW_CONNECTION_ID frame carries the new CID, its sequence number, and the retire-prior-to number. The retire-prior-to identifies existing CIDs that are to be retired. The local QUIC stack must send a RETIRE_CONNECTION_ID for every destination CID whose sequence number is less than retire-prior-to. The CID becomes retired after the local stack receives an ACK for its RETIRE_CONNECTION_ID frame. Although the OpenSSL QUIC stack supports at most one destination CID for every connection, it can be tricked into processing more than one RETIRE_CONNECTION_ID frame per connection. The OpenSSL QUIC stack currently retires the destination CID as soon as it receives the NEW_CONNECTION_ID, while in fact the destination CID must be retired after an ACK for the RETIRE_CONNECTION_ID frame is received. Correcting the flawed logic also fixes the backlog growth. [1] https://datatracker.ietf.org/doc/html/rfc9000#name-issuing-connection-ids FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside of the OpenSSL FIPS module boundary.

Issue summary: The first concurrent use of the same X.509 certificate by several threads may cause its cached extension data to be freed while another thread is still using it. Impact summary: A remote, unauthenticated peer could crash a multi-threaded TLS client, or a multi-threaded TLS server that requests client certificates, if the first certificate chains built to the same trusted CA certificate are built by several connections at the same time. This is a use-after-free read, which is likely to crash the process, resulting in a Denial of Service. CWE: CWE-416: Use After Free Description: OpenSSL caches the decoded values of a certificate's X.509v3 extensions inside the X509 object the first time they are needed. In OpenSSL 4.0 this cache is built in two phases: the extension values are computed while holding a read lock on the certificate, and the results are then installed into the certificate under a write lock. Because a read lock does not exclude other readers, several threads can compute the cache for the same certificate at the same time. Each thread that subsequently acquires the write lock installs its own results and frees the values installed by the thread before it, even though that earlier thread has already marked the cache as complete and may have returned pointers into it to its caller. A caller still using those pointers then reads freed memory. Any certificate shared between threads is exposed the first time its extensions are decoded. In TLS the certificates at risk are the trusted CA certificates supplied for chain verification, by whatever means, since these are shared by every connection and their extensions are decoded and cached the first time a chain is built to them. Certificates sent by the peer are decoded separately for each connection and are not shared, so they are not affected. In a TLS client verifying server certificates, or a TLS server that requests and verifies client certificates, the use-after-free could only occur if the first chains built to the same trusted CA are built by several connections at the same time. FIPS impact: no The FIPS module is not affected as X.509 certificate handling is outside of the OpenSSL FIPS module boundary. OpenSSL 4.0 is vulnerable to this issue. OpenSSL 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are not affected by this issue. OpenSSL 4.0 users should upgrade to OpenSSL 4.0.3. This issue was reported on 27 August 2026 by Tim Becker (Xint.io) and independently in a public report on 31 August 2026 by aydinmercan. The fix has been developed by Bob Beck. -- cut (non-publishing metadata for internal use) -- Reported by: Tim Becker (Xint.io), aydinmercan Fixed by: Bob Beck

Issue summary: The DTLS retransmission logic does not correctly handle a handshake message write that is suspended part-way through. The retransmitted message can be read past the message buffer and the retransmission overwrites the internal state the suspended write needs to resume correctly. Impact summary: The retransmitted message can disclose a heap memory to the peer as plaintext handshake data or cause a crash and a Denial of Service when the read reaches an unmapped memory region. CWE: CWE-125: Out-of-bounds Read Description: DTLS handshake messages can be written out in multiple fragments, and a write can suspend mid-message (returning WANT_WRITE) if the underlying transport temporarily cannot accept more data. While such a write is suspended, the DTLS retransmission timer may independently fire and ask the retransmission logic to resend an earlier, already-acknowledged-as-sent message from its retransmit queue. The retransmission logic reused the same internal buffer and position tracking as the message that was still being written, without resetting the position back to the start of the message being retransmitted. As a result the retransmission was read starting from wherever the suspended write had left off, producing a mislabelled message whose body was leftover bytes from the other, larger message still in flight - content that was never meant to be sent at that point, and which could run past the end of the allocated buffer. Separately, even when the retransmission is positioned correctly, allowing it to run to completion while another write is suspended overwrites the same shared bookkeeping that the suspended write depends on to resume. When the application later resumes the suspended write (via a subsequent SSL_read(), SSL_write(), SSL_accept(), or SSL_connect() call), it finds that bookkeeping in a state inconsistent with the message and aborts the process in a debugging build. The fix resets the retransmission's read position to the start of the message before resending, and skips retransmission entirely whenever a handshake write is still suspended, deferring to the next call that resumes it instead. FIPS impact: no The affected code is outside the FIPS module boundary.

Issue summary: A TLS server that calls SSL_set_SSL_CTX() to switch a connection to a different SSL_CTX part way through a handshake may access memory beyond the end of an internal array if the replacement context knows about more provider signature algorithms than the context the connection was created from. Applications which never call SSL_set_SSL_CTX() are not affected. Impact summary: A remote peer may be able to cause a small out-of-bounds read, and in some circumstances a fixed-value out-of-bounds write, on the server heap. This may lead to a Denial of Service. CWE: CWE-787: Out-of-bounds Write Description: A TLS connection records how many certificate slots it has when it is created, taken from the SSL_CTX that created it: the built-in certificate types plus one slot for each provider TLS-SIGALG entry that context was aware of. That count sizes an internal array of per-slot certificate validity flags. An application may replace a connection's SSL_CTX part way through the handshake by calling SSL_set_SSL_CTX(), most commonly from a servername callback in order to serve a different virtual host. Doing so did not refresh the recorded count. A provider signature algorithm's slot index is its position in the list of whichever context resolves it, so if the replacement context is aware of more of them than the original, an algorithm offered by the peer can resolve to an index beyond the end of the array. Processing the peer's signature algorithms then reads one four byte word past the end for each such algorithm and, where the word read is zero, writes a fixed value over it. A peer offering many of them can corrupt heap metadata and abort the process. Only provider signature algorithms which occupy one of the excess slots, and which the server also has configured, have this effect. Codepoints the replacement context does not recognise are discarded without being resolved to a slot, and provider signature algorithms are usable only from TLS 1.3. The two contexts must therefore be aware of different numbers of provider signature algorithms, which requires separate library contexts, a provider loaded between the two being created, or providers which differ in what they advertise - in 4.0, for example, the default provider advertises SM2 where the FIPS provider does not. A deployment meeting the condition is also unable to negotiate the affected algorithms with legitimate clients, since the same stale count hides the corresponding certificates, so the misconfiguration is likely to be noticed. For that reason, and because the configuration is not the default, this issue has been assessed as Low severity. FIPS impact: no No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary.

Issue summary: QUIC process may keep memory for QUIC packet buffer for much longer period than necessary. Impact summary: Remote peer can exploit this vulnerability by sending maliciously crafted packets, making the local QUIC stack to keep the memory for packet buffers allocated. The time for which the memory remains allocated is entirely under the control of the potentially malicious remote peer. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: To save copy operation from the packet buffer to the stream reassemble buffer the QUIC stack leaves the stream data on the packet buffer waiting to be copied to a buffer provided by the local receiving application. The QUIC stack releases a reference to the packet buffer only after the data are copied to the application buffer. This design is more efficient for legitimate data transfers but enables an attacker to allocate a lot more memory than actually required by the data kept in the receiving stream buffer. To mitigate the vulnerability, the QUIC stack now calculates and monitors memory overhead for every stream. The memory overhead for a single stream frame is calculated as a difference between the size of the whole packet that carries the stream frame and the size of the stream frame itself. The memory overhead for a single stream frame is added to the total (cumulative) memory overhead QUIC stack keeps for each stream. Once the cumulative memory overhead exceeds 64kB, the QUIC stack moves the stream frame data from the packet buffer to the stream buffer, starting with the next packet received. FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside of the OpenSSL FIPS module boundary.

Issue summary: ChaCha20-Poly1305 and AES-OCB decryption with an empty ciphertext can report success without verifying the supplied authentication tag when the operation is finalized by calling the EVP_Cipher() function. Impact summary: Applications calling EVP_Cipher() on an empty ciphertext and expecting the call to check the AEAD tag may accept forged messages. CWE: CWE-354 (Improper Validation of Integrity Check Value) Description: The EVP_Cipher() API call for AEAD ciphers behaves like a one shot encryption and decryption call. It also verifies the AEAD tag after the decryption operation. However for AES-OCB and ChaCha20-Poly1305 ciphers it skipped the AEAD tag verification when an empty ciphertext was passed to the function. The callers of this function might believe that a successful return indicates a valid AEAD tag for these ciphers, even when that has not truly been validated in this case. FIPS impact: no The FIPS modules in 4.0, 3.6, 3.5, 3.4, and 3.0 are not affected by this CVE as the affected algorithms are not FIPS approved and thus not implemented in the FIPS module.

Issue summary: OpenSSL CMP password based protection verification only checks whether the protectionAlg parameter was not NULL and not its ASN.1 type, before treating it as a PBMParameter. A crafted message can contain a parameter of a different type, which is then dereferenced as an invalid pointer. Impact summary: A remote, unauthenticated attacker can crash an application acting as a CMP server that accepts PBM-protected messages, or a CMP client talking to a malicious or intercepted CMP server, resulting in a Denial of Service. CWE: CWE-476: NULL Pointer Dereference Description: When verifying the password-based MAC protection of a CMP message, OpenSSL library reads the protectionAlg algorithm parameter with X509_ALGOR_get0(), which returns both the parameter type and its value pointer. The value is then cast to an ASN1_STRING and treated as the expected PBMParameter after only checking that pointer is not NULL. The parameter type returned by X509_ALGOR_get0() was never consulted. This happens during protection verification, before any MAC is computed, so no knowledge of the PBM shared secret is required; the only precondition is that PBM verification is reachable. On the server side this is reached from OSSL_CMP_SRV_process_request() for any application that stands up a CMP server accepting PBM-protected messages, and on the client side from CMP response validation against a malicious or on-path (MITM) server. The reliable consequence is a denial of service; there is no memory disclosure, no controlled memory write, and no path to code execution. CMP is a specialized feature that an application must explicitly enable. FIPS impact: no As the CMP code lives outside the FIPS module boundary, no FIPS modules are affected by this CVE.

Issue summary: When OpenSSL processes QUIC traffic from a peer that repeatedly sends ack-eliciting packets while not acknowledging ACK-only responses, the QUIC stack can retain ACK-only packet metadata for the lifetime of the connection. Impact summary: A remote peer that can complete a QUIC handshake can cause connection-scoped memory growth which may lead to Denial of Service through memory exhaustion, especially with sustained traffic or many concurrent QUIC connections. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: When the OpenSSL QUIC stack sends an ACK-only packet, there is no requirement by the QUIC protocol that the peer will acknowledge that ACK-only packet (i.e. it is itself not ack-eliciting). However, the OpenSSL implementation stores the metadata about the ACK frames regardless. In and of itself that's ok, but if a malicious peer establishes a connection, and then drives the connection such that ACK-only packets are forced from the OpenSSL implementation peer (i.e., by sending numerous PING frames), and then withholding any subsequent acks for ack-eliciting data, like legitimate data, said malicious peer can force inappropriate memory growth on the OpenSSL peer, potentially leading to a Denial of Service. The fix is to ensure that we account for the transmission of the ACK-only packet in the packet histories high and low watermark without actually storing the ACK-only packet metadata itself. FIPS impact: no The OpenSSL FIPS module is not affected as the QUIC code is outside the FIPS module boundary.

Issue summary: OpenSSL CMP response validation passed an unexpected response sender distinguished name directly as the format string to `ERR_raise_data()`. Impact summary: A malicious or intercepted CMP endpoint can crash a CMP client that enforces an expected sender or uses a pinned server certificate whose subject becomes the default expected sender. CWE: CWE-134 (Use of Externally-Controlled Format String) Description: When validating a received CMP message, ossl_cmp_msg_check_update() converts the peer-supplied sender distinguished name with X509_NAME_oneline() and passes it directly as the format argument to ERR_raise_data(). Percent characters survive the conversion, so a sender DN such as "CN=%s%n" reaches BIO_vsnprintf() as an attacker-controlled format string with no matching variadic arguments. This path is only reached when the caller configures an expected sender or pins a server certificate, which is the normal configuration for a CMP client validating server responses. Since the attacker controls the format string but none of the variadic arguments, such specifiers as %s and %n dereference or write through unrelated stack contents and crash the client. The reliable consequence is a denial of service, when the response comes from a malicious or intercepted CMP endpoint. There is no controlled memory write, arbitrary-address read, or reliable path to remote code execution. FIPS impact: no No FIPS modules are affected by this issue, as the CMP protocol implementation is outside the OpenSSL FIPS module boundary.

Issue summary: OpenSSL CMS decryption sizes the key-unwrap output buffer based on querying the unwrapped key size, but the AES-WRAP-PAD unwrap primitive can write and cleanse more bytes than that query reports, causing an 8-byte out-of-bounds heap write. Impact summary: An attacker who supplies a crafted CMS message can trigger a deterministic 8-byte out-of-bounds heap write when the victim decrypts it with CMS_decrypt(), corrupting the heap and typically resulting in a Denial of Service. CWE: CWE-787: Out-of-bounds Write Description: The key-wrap OID is potentially attacker-controlled on the wire. CMS unwrapping allows both id-aesNNN-wrap-pad and id-aesNNN-wrap ciphers. An attacker can take a legitimate message and change a single OID byte to select the padded variant while leaving the message otherwise valid. Since the unwrap key is derived from the recipient's private operation (ECDH key agreement or ML-KEM decapsulation), the RFC 5649 integrity check cannot pass, and the decryption fails with integrity failure. The write is a fixed-size (8-byte), fixed-value (zero) heap overflow immediately past the allocation, requires no special configuration, and is reachable from the public CMS_decrypt() function. The consequence is a heap corruption leading to a Denial of Service. The fix in the CMS code sizes the unwrap output buffer for the worst case so a failed unwrap cannot write past the allocation. FIPS impact: no As the CMS code lives outside the FIPS module boundary, no FIPS modules are affected by this CVE.

Issue summary: Receiving a DTLS record for a future epoch while a handshake is in progress causes OpenSSL to buffer far more memory than the record itself requires. Impact summary: A peer can use a small amount of network traffic to make an OpenSSL DTLS endpoint retain a disproportionately large amount of memory, which may lead to a Denial of Service. CWE: CWE-405: Asymmetric Resource Consumption (Amplification) Description: While a DTLS handshake is in progress, a peer may legitimately have already moved on to the next epoch (for example, having sent its ChangeCipherSpec and Finished messages) before the local endpoint has processed the same transition, typically because of reordering on the underlying UDP transport. OpenSSL buffers such early records so that they can be processed once the local endpoint catches up. Buffering a record currently retains the entire read buffer it arrived in, which is sized to hold the largest possible DTLS record (around 16 kilobytes), rather than just the bytes that make up the record itself. Up to 100 such records may be buffered per connection. As a result, a peer that sends a stream of small forged records claiming to belong to the next epoch can cause an OpenSSL DTLS endpoint to retain around 1.7 megabytes of memory, despite sending only a small fraction of that amount of data over the network. An attacker therefore gains a memory amplification factor of around 1200, and can multiply the effect across as many associations as it is able to open, making this a remote memory exhaustion Denial of Service risk for DTLS servers. Since the memory retained per connection remains bounded, and any limit an application already places on the number of concurrent associations also bounds the total exposure, this issue has been assessed as Low severity. FIPS impact: no No FIPS modules are affected by this issue as the affected code is outside the OpenSSL FIPS module boundary. OpenSSL 4.0, 3.6, 3.5, 3.4, 3.0, 1.1.1 and 1.0.2 are vulnerable to this issue. OpenSSL 4.0 users should upgrade to OpenSSL 4.0.2. OpenSSL 3.6 users should upgrade to OpenSSL 3.6.4. OpenSSL 3.5 users should upgrade to OpenSSL 3.5.8. OpenSSL 3.4 users should upgrade to OpenSSL 3.4.7. OpenSSL 3.0 users should upgrade to OpenSSL 3.0.22. Premium support customers only: OpenSSL 1.1.1 users should upgrade to OpenSSL 1.1.1zi OpenSSL 1.0.2 users should upgrade to OpenSSL 1.0.2zr This issue was reported on 18 May 2026 by Amazon Web Services. The fix has been developed by Matt Caswell. -- cut (non-publishing metadata for internal use) -- Reported by: Amazon Web Services Fixed by: Matt Caswell

Issue summary: QUIC server may double free QRX (QUIC record layer RX) object when channel creation fails for initial packet. Impact summary: Double free leads to heap corruption, which typically results in termination of QUIC server process, leading to Denial of Service. There is so far no evidence that this double free is exploitable for remote code execution, thus it is considered highly improbable. CWE: CWE-415: Double Free Description: In order to validate initial packet, OpenSSL QUIC stack default packet handler (port_default_packet_handler()) creates a so-called QRX object. If the initial packet validates successfully with QRX object, the default packet handler proceeds to channel (connection object) creation. The QRX object used for packet validation is passed to port_bind_channel(), so it becomes part of the newly created connection. If port_bind_channel() fails, then it also frees the QRX object. Once port_bind_channel() returns, the port_default_packet_handler() detects the failure and proceeds to the error branch, where the same QRX object is freed for the second time. The failure in port_bind_channel() function can be induced with a relatively low effort by a malformed (non RFC 9000 compliant) INITIAL packet. If the packet carries DCID (destination connection ID) which is shorter than 8 bytes, then port_bind_channel() jumps to the error path after ossl_quic_lcidm_enrol_odcid() detects that the DCID has invalid length. FIPS impact: no The FIPS module is not affected, as the QUIC implementation is outside of the OpenSSL FIPS module boundary.

Issue summary: In a server or client configuration with RFC7250 Raw Public Keys (RPKs) enabled, and only the private key (with no associated certificate) configured locally, a NULL pointer dereference may occur when the remote peer solicits raw public keys and also sends the typically omitted "signature_algorithms_cert" TLS extension. Impact summary: The impact is limited to a possible Denial of Service as a result of an application abort, no data disclosure or remote command execution are possible. CWE: CWE-476: NULL Pointer Dereference Description: While a passing comment in sample code in the documentation suggests that key-only RPK configurations are supported, the best-practice RPK configuration is to always configure a corresponding certificate (possibly self-signed or signed by any convenient CA). When the private key is configured along with a matching certificate, the "signature_algorithms_cert" extension is handled reliably even without the fix, and peer clients or servers that don't support raw public keys may be able to complete a TLS connection by pinning or verifying the corresponding certificate or its public key. Deployments that prefer to configure just a private key with no certificate need to upgrade to an updated release as noted below. FIPS impact: no No FIPS modules are affected by this issue, as the SSL protocol implementation is outside the OpenSSL FIPS module boundary.

Issue summary: When an OpenSSL QUIC server (Listener SSL object) processes valid QUIC Initial packets for unknown destination connection IDs, it can allocate and queue new incoming channels without enforcing any limit. Impact summary: A remote peer that can make many Initial packets reach the server listener faster than the application accepts connections, can cause the memory allocated to store the per-channel state to grow without any limits, potentially making the QUIC listener unavailable and causing Denial of Service. CWE: CWE-770: Allocation of Resources Without Limits or Throttling Description: The function that handles inbound QUIC packets uses Connection-Id from the packet header to find an existing connection (QUIC channel). If no existing connection is found and the packet type is INITIAL, the function treats the packet as a new connection. It allocates a new channel object and inserts it into a queue where it waits to be accepted by the local application with SSL_accept(3ossl). The memory occupied by these initial channel objects may grow without bounds if the application is not able to call SSL_accept() frequently enough to serve these inbound connection requests. The issue is present since OpenSSL 3.5 when the QUIC server implementation was added. The fix introduces a limit for pending connections. The default limit is set to 256 pending connections (waiting to be accepted by the local application). Applications may change the default by calling SSL_set_value_uint(3ossl). FIPS impact: no The FIPS module is not affected as the QUIC implementation is outside of the OpenSSL FIPS module boundary.

Issue summary: A malicious TLS server can cause a memory leak in a TLS client that has enabled OCSP response checking by sending an OCSP response that contains no single response entries. Impact summary: An attacker can leak an attacker-tunable amount of memory per TLS handshake in a victim client application. A long-running client that repeatedly connects to a malicious server can have its memory exhausted, resulting in a Denial of Service. CWE: CWE-401: Missing Release of Memory after Effective Lifetime Description: The affected function is called during X.509 certificate chain verification when OCSP response checking is enabled with the X509_V_FLAG_OCSP_RESP_CHECK or X509_V_FLAG_OCSP_RESP_CHECK_ALL verification flags, for example when a TLS client verifies an OCSP response stapled into the TLS handshake by the server. When the received BasicOCSPResponse contains an empty SEQUENCE OF SingleResponse, which is permitted on the wire and accepted by the OpenSSL decoder, the OCSP_BASICRESP structure allocated by OCSP_response_get1_basic() was not freed because an early return bypassed the cleanup code at the end of the function. The amount of memory leaked per handshake can be amplified by the attacker by padding the certs field of the BasicOCSPResponse with bogus certificates, which are parsed and stored in the leaked structure before the empty response check triggers the early return. A long-running TLS client that repeatedly connects to a malicious server can have its memory exhausted over time. OCSP response checking is not enabled by default. Only client applications that explicitly enable the OCSP response check verification flags are affected. FIPS impact: no The FIPS modules in 4.0 and 3.6 are not affected by this issue as the affected code is outside the OpenSSL FIPS module boundary.