Traefik

Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.57, and 3.7.13, Traefik accepts a rootless HTTP/1 request target that Go stores in URL.Opaque while leaving URL.Path empty. The rewriteRequestBuilder path evaluates routing, path sanitization, forwardAuth, encodedCharacters, and access logging against a path normalized to / but forwards URL.Opaque verbatim to the backend, allowing cross-vhost routing bypass, path-scoped authorization bypass, and access-log evasion when the backend interprets the opaque target as a path. This issue is fixed in 2.11.57 and 3.7.13.

Traefik is an open source HTTP reverse proxy and load balancer. From 2.11.26 until 2.11.57 and 3.7.13, Traefik forwards a client-supplied Connection header requesting Upgrade, the Upgrade: h2c token, and HTTP2-Settings to a shared backend. If the backend accepts h2c and returns 101 Switching Protocols, Traefik enters a raw tunnel and no longer applies routers, BasicAuth, ForwardAuth, IPAllowList, RateLimit, access logging, metrics, or tracing to later HTTP/2 requests, allowing an unauthenticated request through an unprotected route to reach protected paths on the same backend. This issue is fixed in 2.11.57 and 3.7.13.

Traefik is an open source HTTP reverse proxy and load balancer. From 2.11.0 until 2.11.57 and 3.7.13, the HTTP/3 entrypoint ConnContext does not call service.AddTransportOnContext, so kerberosRoundTripper uses a shared backend transport instead of a transport dedicated to each frontend connection. With HTTP/3 enabled, a backend using connection-bound NTLM or Negotiate authentication, and backend keep-alive, an unrelated client can reuse a backend connection authenticated for a victim, read victim-only data, and act as that victim without the victim credentials. This issue is fixed in 2.11.57 and 3.7.13.

Traefik is an open source HTTP reverse proxy and load balancer. From 3.2.0 until 3.7.13, Traefik entrypoint defenses aliasHeadersStrategy, underscoreHeadersStrategy, and forwardedHeaders inspect req.Header but not req.Trailer, allowing an unauthenticated client to submit an aliasing or trusted header name in an HTTP/1.1 chunked trailer or an HTTP/2 trailer. When the retry or buffering middleware reads the body before the reverse proxy clones the request, the attacker-controlled trailer value reaches a backend that merges trailers into the header namespace, bypassing the documented delete or reject behavior and potentially spoofing identity or forwarded routing data. This issue is fixed in 3.7.13.

Traefik is a HTTP reverse proxy and load balancer. In versions >= v3.7.0 and <= v3.7.11, the Kubernetes ingress-nginx provider mishandles Ingresses that carry both an authentication annotation and the nginx.ingress.kubernetes.io/from-to-www-redirect annotation. For such Ingresses the provider creates an additional 'sibling' router that matches on the host alone, carries only the RedirectRegex middleware, and still points at the parent router's protected backend service. Because RedirectRegex is not a terminal handler, a request its pattern does not match is forwarded to the backend, and because the redirect pattern only accepts a numeric port while Traefik's host matcher canonicalizes the authority via net.SplitHostPort, a request with a non-numeric or empty port (for example 'Host: www.example.com:x') selects the sibling router, misses the redirect, and is proxied to the protected backend with none of the Ingress's annotation-derived middlewares applied. This discards not only authentication (e.g. BasicAuth) but every annotation-derived middleware, including source-IP allowlisting. Traefik v2 and v3 releases before v3.7.0 are not affected. The issue is fixed in v3.7.12.

Traefik before v2.11.55 and v3.0.0 through v3.7.10 contain a TLS option conflict resolution vulnerability that allows unauthenticated attackers to bypass client-certificate authentication by creating conflicting TLS options on multi-host routers. Attackers can reach protected backends by exploiting shared TLS resolution across multiple hostnames in a single router rule, causing the strict mTLS requirement to fall back to default options for all hosts.

Traefik versions >= v3.7.0 and <= v3.7.10 contain an authentication bypass in the Kubernetes Ingress NGINX provider. The TLS option generated for an Ingress carrying the nginx.ingress.kubernetes.io/auth-tls-secret annotation was named after the Ingress namespace and name. As a result, two Ingress objects sharing the same host, the same client CA secret, and the same client-authentication mode produced two distinct TLS option names for that host. Traefik treats this as a TLS options conflict and falls back to the entry point's default TLS configuration, which does not request a client certificate, so a route configured with nginx.ingress.kubernetes.io/auth-tls-verify-client: "on" becomes reachable without a client certificate. Only the v3.7 line is affected; the issue is fixed in v3.7.11.

Traefik versions before v2.11.55 and versions v3.0.0 through v3.7.10 contain an authentication bypass vulnerability in the digestAuth middleware where unknown usernames receive an empty secret instead of rejection. Attackers can compute a valid digest response using the empty secret and arbitrary credentials to bypass authentication on any digestAuth-protected route without a valid username or password.

Traefik versions from v3.7.1 fail to enforce crossProviderNamespaces restrictions on the traefik.ingress.kubernetes.io/service.middlewares Service annotation in the Kubernetes Ingress provider. A namespace-limited tenant excluded from the allowlist can attach an operator-owned middleware to its Service, and if that middleware injects backend credentials, recover them at a controlled backend.

Traefik is an open source HTTP reverse proxy and load balancer. From 3.0.0 until 3.6.25 and 3.7.10, Traefik's Kubernetes Gateway API provider in pkg/provider/kubernetes/gateway/httproute.go, grpcroute.go, tcproute.go, and tlsroute.go builds HTTPRoute, GRPCRoute, TCPRoute, and TLSRoute router and service identities by hyphen-concatenating namespace, route name, Gateway identity, entry point, and rule index, allowing colliding Routes to overwrite another namespace's backend. This issue is fixed in 3.6.25 and 3.7.10.

Traefik is an open source HTTP reverse proxy and load balancer. Prior to 2.11.53, 3.6.24, and 3.7.9, Traefik's default HTTP reverse proxy forwards a plain HTTP/2 or HTTP/3 CONNECT request and its body to an HTTP/1.1 upstream through a shared net/http.Transport. When the upstream answers the CONNECT with a keep-alive non-2xx response and does not drain the body, Traefik returns the desynchronized backend socket to its shared pool and reuses it for other clients. An unauthenticated attacker can use this behavior to make a different client read the attacker's smuggled response, which can include authenticated or private content from another request. The ForwardAuth middleware with forwardBody true and preserveRequestMethod true can re-issue a CONNECT with the buffered body attached, exposing the auth-client pool to the same desynchronization. This issue is fixed in 2.11.53, 3.6.24, and 3.7.9.

Traefik versions >= v3.7.0 and <= v3.7.7 contain a path traversal vulnerability in the Kubernetes Ingress NGINX provider's RewriteTarget middleware (generated from the nginx.ingress.kubernetes.io/rewrite-target annotation). When an Ingress path uses a regex that captures attacker-controlled text without requiring a path separator (e.g., path /api(.*) with rewrite target /$1), a crafted request such as /api../admin matches the public router, is rewritten to a dot-segment traversal path (/../admin), and is forwarded without post-replacement normalization validation. A backend that normalizes dot segments resolves the path to a protected endpoint (e.g., /admin) reachable only through a separate router secured with BasicAuth, DigestAuth, or ForwardAuth, resulting in route-level authentication bypass. The issue is fixed in v3.7.8.

Traefik versions <= v2.11.51, >= v3.6.0 <= v3.6.22, and >= v3.7.0 <= v3.7.6 contain an authentication bypass via path traversal in the ReplacePathRegex middleware. When ReplacePathRegex is configured with a regex that captures user-controlled path segments without a mandatory path separator (e.g. regex "^/api(.*)", replacement "/$1"), the middleware forwards the replaced path to the backend without validating that it matches its normalized form. An unauthenticated remote attacker can send a crafted request (e.g. GET /api../admin) that produces an un-normalized path such as /../admin, which a backend that normalizes paths resolves to a protected route, bypassing authentication middleware. Fixed in v2.11.52, v3.6.23, and v3.7.7.

Traefik is an HTTP reverse proxy and load balancer. Prior to v2.11.51, v3.6.22, and v3.7.6, Traefik's BasicAuth, DigestAuth, and ForwardAuth middlewares strip canonical-cased spoofed identity headers before writing Traefik's own value, but do not account for underscore-variant header names, which many backends normalize identically to dashed forms. An attacker able to reach a protected route can inject an underscore-variant header that survives Traefik's stripping and reaches the backend alongside, or on the unauthenticated ForwardAuth authResponseHeaders path instead of, the value Traefik intended to set, spoofing identity or authorization context. This issue is fixed in versions v2.11.51, v3.6.22, and v3.7.6.

Traefik is an HTTP reverse proxy and load balancer. Versions prior to 3.7.3, 3.6.18, and 2.11.51 have a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker. This vulnerability is fixed in versions 3.7.3, 3.6.18, and 2.11.51.

Traefik is an HTTP reverse proxy and load balancer. Prior to 2.11.48, 3.6.19, and 3.7.3, there is a high severity vulnerability in Traefik's StripPrefix middleware that allows an unauthenticated attacker to bypass route-level authentication and authorization. When a public router matches on a PathPrefix rule and applies the StripPrefix middleware, a request path containing .. or its percent-encoded form %2e%2e can match the public route at routing time and then, after the prefix is stripped and the path is normalized, resolve to a path served by a separate, authenticated router. As a result, an attacker can reach protected backend paths — such as admin or internal configuration endpoints — without satisfying the authentication middleware attached to the protected router. This vulnerability is fixed in 2.11.48, 3.6.19, and 3.7.3.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a high severity authentication bypass vulnerability in Traefik's StripPrefixRegex middleware when used in combination with ForwardAuth, BasicAuth, or DigestAuth. The middleware matches the regex against the decoded URL path but uses the resulting byte length to slice the percent-encoded raw path. When a dot (or multiple dots) appears in the prefix portion of the URL, the raw path after stripping becomes a dot-segment (e.g. /./admin/secret). ForwardAuth receives this dot-segment path in X-Forwarded-Uri, which does not match the protected path patterns and therefore allows the request through. The backend then normalizes the dot-segment to the real path per RFC 3986 and serves the protected content An unauthenticated attacker can exploit this against any backend that performs dot-segment normalization. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is a high severity authentication bypass vulnerability in Traefik's ForwardAuth and snippet-based authentication middleware. Traefik's forwarded-header sanitization logic targets only canonical header names (e.g., X-Forwarded-Proto) and does not strip or normalize alias variants that use underscores instead of dashes (e.g., X_Forwarded_Proto). These unsanitized alias headers are forwarded intact to the authentication backend. When the backend normalizes underscore and dash header forms equivalently, an attacker can inject spoofed trust context — such as a trusted scheme or host — through the alias headers and bypass authentication on protected routes without valid credentials. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.43, 3.6.14, and 3.7.0-rc.2, there is an authentication bypass vulnerability in Traefik's ForwardAuth middleware when trustForwardHeader=false is configured and Traefik is deployed behind a trusted upstream proxy. This issue has been patched in versions 2.11.43, 3.6.14, and 3.7.0-rc.2.

Traefik is an HTTP reverse proxy and load balancer. Versions 2.11.40 and below, 3.0.0-beta1 through 3.6.11, and 3.7.0-ea.1 are vulnerable to mTLS bypass through the TLS SNI pre-sniffing logic related to fragmented ClientHello packets. When a TLS ClientHello is fragmented across multiple records, Traefik's SNI extraction may fail with an EOF and return an empty SNI. The TCP router then falls back to the default TLS configuration, which does not require client certificates by default. This allows an attacker to bypass route-level mTLS enforcement and access services that should require mutual TLS authentication. This issue is patched in versions 2.11.41, 3.6.11 and 3.7.0-ea.2.

Traefik is an HTTP reverse proxy and load balancer. From version 2.11.9 to 2.11.37 and from version 3.1.3 to 3.6.8, there is a potential vulnerability in Traefik managing the Connection header with X-Forwarded headers. When Traefik processes HTTP/1.1 requests, the protection put in place to prevent the removal of Traefik-managed X-Forwarded headers (such as X-Real-Ip, X-Forwarded-Host, X-Forwarded-Port, etc.) via the Connection header does not handle case sensitivity correctly. The Connection tokens are compared case-sensitively against the protected header names, but the actual header deletion operates case-insensitively. As a result, a remote unauthenticated client can use lowercase Connection tokens (e.g. Connection: x-real-ip) to bypass the protection and trigger the removal of Traefik-managed forwarded identity headers. This issue has been patched in versions 2.11.38 and 3.6.9.

Traefik is an HTTP reverse proxy and load balancer. Prior to versions 2.11.38 and 3.6.9, there is a potential vulnerability in Traefik managing TLS handshake on TCP routers. When Traefik processes a TLS connection on a TCP router, the read deadline used to bound protocol sniffing is cleared before the TLS handshake is completed. When a TLS handshake read error occurs, the code attempts a second handshake with different connection parameters, silently ignoring the initial error. A remote unauthenticated client can exploit this by sending an incomplete TLS record and stopping further data transmission, causing the TLS handshake to stall indefinitely and holding connections open. By opening many such stalled connections in parallel, an attacker can exhaust file descriptors and goroutines, degrading availability of all services on the affected entrypoint. This issue has been patched in versions 2.11.38 and 3.6.9.

Traefik is an HTTP reverse proxy and load balancer. Prior to 3.6.8, there is a potential vulnerability in Traefik managing STARTTLS requests. An unauthenticated client can bypass Traefik entrypoint respondingTimeouts.readTimeout by sending the 8-byte Postgres SSLRequest (STARTTLS) prelude and then stalling, causing connections to remain open indefinitely, leading to a denial of service. This vulnerability is fixed in 3.6.8.